![]() I also picked ones long enough so they could be used to attach the back plastic plate. I picked hex screws from the hardware store that were about the same size as the original plastic pieces. I wanted to give it a drab olive green color.Īfter painting, I drilled holes for some hex screws. The out-of-the-box green of the body is way too saturated and has some cheesy silver weathering on it - clearly done with quick silver dry paint brush strokes. I masked off anything on the main case body that wasn't green. The result wasn't as perfect as I'd like but I figured that the new screws and some weathering will make any plastic imperfections in these areas blend in. Like with my trap, I used a dremel to sand down the plastic - there are 12 locations in all. I also wanted to replaced the fake plastic screws with real hex screws. I used a 1/4" drill bit to make quick work of the underside connection and the rivet came right off. Second, with the green case now separated, I could access the underside of the rivet holding the fabric strap on the top. They are glued together but some prying broke them apart. This involved gently prying the groove between the green case and the black plate. Weathering everything to look dirty and gunkyįirst the break down - There were two challenges here: first, I needed to separate the black plastic/rubber back face.Replacing the top strap rivet with a snap button.Replacing the molded plastic screws with real hex screws.Repainting the main body an olive green.Following up on a mod-in-progress to my Spirit trap, I thought I'd take on a simple activity and do some simple things to some Spirit goggles to make them feel like a more authentic prop. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |